Glock Stippling

$ 150.00$ 340.00

VISIT OUR NEW WEBSITE AT HTTPS://IDGSTIPPLING.COM TO ORDER. WE ARE NO LONGER SUPPORTING THIS WEBSITE.

Integral Defense Group, LLC is proud to announce that we can now accept serialized frames (i.e. Glock, M&P, CZ, etc) for cerakote and custom frameworks such as stippling, trigger under-cuts and more. Integral Defense Group, LLC is now a Dealer in Firearms (FFL-07) allowing us to buy, sell and manufacture firearms.

Lead time is roughly 3-6 weeks (depending on if Cerakote is involved).

Here is a current run-down of our offerings:

Stippling: Choose from one of our various stippling textures (i.e. Spawn, Havok, Gambit, Xavier or Silicone Carbide). Spawn and Havok provide an improved grip while not being too harsh when concealed carry against your body. Gambit and Xavier patterns are more aggressive and ‘may’ be a little harder if carrying against your body. The silicone carbide application utilizes a two-part epoxy and silicone carbide is applied to the grip. This is recommended for duty-use or outside the waistband holsters. The recessed area is sanded down to a polish finish.

Finger-Groove Removal: Choose between Keep or Remove. Removing the finger grooves is aesthetically pleasing but also allows you to put your fingers where the rest naturally as opposed to some pre-canned location that may not cooperate with your grip.

Trigger Undercut: Choose No Undercut, Single Undercut or Double Undercut. The Single Undercut is where we create a recess where the middle finger of your dominant hand rests when gripping the firearm. This has been known to cause “Glock knuckle” by many. A single undercut allows your dominant hand to sit higher on the grip, and in return, provide you with a higher grip to better help you mitigate recoil. The Double Undercut is the same as the single but provides and additional undercut directly on the bottom of the trigger guard. This extra undercut is stippled and provides a more positive grip (and reference point) for your support hand. Both areas are sanded down to a polish before stippling is added.

Stabilizer Cuts: This is also known as a “gas pedal” or “accelerator cut” by many. The stabilizer cuts are done on both sides of the grip for symmetry and provide a shelf of sorts your support thumb with a shelf to rest it on. This modification is great for shooters who adopted the modern handgun grip techniques which stress a two-hand “high tang grip” with thumbs driven forward. Functionally, this modification allows you to help mitigate recoil by being able to introduce some downward pressure from your thumb. The cutaway part is sanded to a polish finish and a rectangular area is stippled to match your stippling texture chosen above.

Cerakote: Choose to leave everything factory color -or- choose one of our cerakote options. Options include single color or multi-color (aka camouflage). You can choose to have just your grip cerakoted -or- have your grip AND slide cerakoted to match. INCLUDE YOUR CHOICE OF CERAKOTE COLOR(S) ON THE CHECKOUT PAGE IN THE ORDER NOTES. You must also add this information to your order form that you mail with your firearm.

IMPORTANT – PLEASE READ: Before placing an order, you must follow and obey the following:

  • Ordering this service will only secure you a spot in our books for custom framework. You need to download this order form, fill it out and mail it with your firearm. DOWNLOAD ORDER FORM PDF
  • The paperwork must get filled out and get shipped along with your firearm. The paperwork should match the selections you chose when placing your order online. If there are any discrepancies then then we work off the paperwork and you will be invoiced for anything additional that you didn’t provide online.
  • Paperwork must also include a photocopy of your state issued ID (i.e. driver’s license) and your pistol permit license.
  • Addresses must all match between your shipping address, your state issued license and your pistol permit. We will ONLY ship to your state issued license, carry permit. Otherwise, a local FFL dealer in your area will need to be used. No exceptions!
  • You should ONLY ship via UPS or FedEx. DO NOT USE USPS (US POSTAL SERVICE) TO SHIP YOUR FIREARM! ALWAYS ADD SIGNATURE CONFIRMATION WHEN MAILING! DO NOT ship in the factory box. DO NOT include any markings or writing on the box that would indicate the contents of your package. You are responsible for insuring your package (Integral Defense Group, LLC) cannot be held responsible if you do not follow shipping instructions and your package is lost or stolen.
  • You understand that modifying your firearm will void your firearm’s factory warranty.
  • Integral Defense Group, LLC is not held liable for damages due to misuse or neglect, and are released from any and all claims, lawsuits, and liabilities. Understand that if your frame has previously been stippled, it may not be recoverable. Texture may vary.
  • NO changes to the order once it is submitted. Do not write in additional modifications that are not options above.

Contact Integral Defense Group via Email for any questions you may have: IntegralDefenseGroup@gmail.com

Clear

Description

VISIT OUR NEW WEBSITE AT HTTPS://IDGSTIPPLING.COM TO ORDER. WE ARE NO LONGER SUPPORTING THIS WEBSITE.

Integral Defense Group, LLC is proud to announce that we can now accept serialized frames (i.e. Glock, M&P, CZ, etc) for cerakote and custom frameworks such as stippling, trigger under-cuts and more. Integral Defense Group, LLC is now a Dealer in Firearms (FFL-07) allowing us to buy, sell and manufacture firearms.

Lead time is roughly 3-6 weeks (depending on if Cerakote is involved).

Here is a current run-down of our offerings:

Stippling: Choose from one of our various stippling textures (i.e. Spawn, Havok, Gambit, Xavier or Silicone Carbide). Spawn and Havok provide an improved grip while not being too harsh when concealed carry against your body. Gambit and Xavier patterns are more aggressive and ‘may’ be a little harder if carrying against your body. The silicone carbide application utilizes a two-part epoxy and silicone carbide is applied to the grip. This is recommended for duty-use or outside the waistband holsters. The recessed area is sanded down to a polish finish.

Finger-Groove Removal: Choose between Keep or Remove. Removing the finger grooves is aesthetically pleasing but also allows you to put your fingers where the rest naturally as opposed to some pre-canned location that may not cooperate with your grip.

Trigger Undercut: Choose No Undercut, Single Undercut or Double Undercut. The Single Undercut is where we create a recess where the middle finger of your dominant hand rests when gripping the firearm. This has been known to cause “Glock knuckle” by many. A single undercut allows your dominant hand to sit higher on the grip, and in return, provide you with a higher grip to better help you mitigate recoil. The Double Undercut is the same as the single but provides and additional undercut directly on the bottom of the trigger guard. This extra undercut is stippled and provides a more positive grip (and reference point) for your support hand. Both areas are sanded down to a polish before stippling is added.

Stabilizer Cuts: This is also known as a “gas pedal” or “accelerator cut” by many. The stabilizer cuts are done on both sides of the grip for symmetry and provide a shelf of sorts your support thumb with a shelf to rest it on. This modification is great for shooters who adopted the modern handgun grip techniques which stress a two-hand “high tang grip” with thumbs driven forward. Functionally, this modification allows you to help mitigate recoil by being able to introduce some downward pressure from your thumb. The cutaway part is sanded to a polish finish and a rectangular area is stippled to match your stippling texture chosen above.

Cerakote: Choose to leave everything factory color -or- choose one of our cerakote options. Options include single color or multi-color (aka camouflage). You can choose to have just your grip cerakoted -or- have your grip AND slide cerakoted to match. INCLUDE YOUR CHOICE OF CERAKOTE COLOR(S) ON THE CHECKOUT PAGE IN THE ORDER NOTES. You must also add this information to your order form that you mail with your firearm.

IMPORTANT – PLEASE READ: Before placing an order, you must follow and obey the following:

  • Ordering this service will only secure you a spot in our books for custom framework. You need to download this order form, fill it out and mail it with your firearm. DOWNLOAD ORDER FORM PDF
  • The paperwork must get filled out and get shipped along with your firearm. The paperwork should match the selections you chose when placing your order online. If there are any discrepancies then then we work off the paperwork and you will be invoiced for anything additional that you didn’t provide online.
  • Paperwork must also include a photocopy of your state issued ID (i.e. driver’s license) and your pistol permit license.
  • Addresses must all match between your shipping address, your state issued license and your pistol permit. We will ONLY ship to your state issued license, carry permit. Otherwise, a local FFL dealer in your area will need to be used. No exceptions!
  • You should ONLY ship via UPS or FedEx. DO NOT USE USPS (US POSTAL SERVICE) TO SHIP YOUR FIREARM! ALWAYS ADD SIGNATURE CONFIRMATION WHEN MAILING! DO NOT ship in the factory box. DO NOT include any markings or writing on the box that would indicate the contents of your package. You are responsible for insuring your package (Integral Defense Group, LLC) cannot be held responsible if you do not follow shipping instructions and your package is lost or stolen.
  • You understand that modifying your firearm will void your firearm’s factory warranty.
  • Integral Defense Group, LLC is not held liable for damages due to misuse or neglect, and are released from any and all claims, lawsuits, and liabilities. Understand that if your frame has previously been stippled, it may not be recoverable. Texture may vary.
  • NO changes to the order once it is submitted. Do not write in additional modifications that are not options above.

Contact Integral Defense Group via Email for any questions you may have: IntegralDefenseGroup@gmail.com

Additional information

Stippling

Spawn, Gambit, Havok, Xavier, Silicone Carbide

Finger-Groove Removal

Keep, Remove (+$20)

Trigger Guard Undercut

None, Single Undercut (+$30), Double Undercut ($45)

Stabilizer Cuts

No, Yes (+$35)

Cerakote

None, Single Color (+$75), Camo (+$90)

Reviews

There are no reviews yet.

Be the first to review “Glock Stippling”

Your email address will not be published. Required fields are marked *